Jams, sauces, candles, skincare in glass, homewares, gift hampers. A lot of Australian ecommerce arrives in glass, and the first broken jar usually teaches a brand the same lesson: the parcel network was never going to treat it gently.
There is no fragile service
Australia Post is clear about this. It does not offer a separate fragile service, and it says that writing "Fragile" or "This Way Up" on a parcel "isn't a fail-safe method" (Australia Post).
Parcels are sorted by machine, stacked in cages and handled many times between your door and your customer's. A sticker does not change any of that. The packaging is the only protection the product has, so it has to work without anyone being careful.
How to pack a glass jar so it arrives
1. Seal the lid first. Tighten it, then tape over the join or add a shrink band. A lid that works loose in transit turns one broken jar into a box of wet packaging and a ruined label on everything else in it.
2. Contain anything that can leak. Put each jar holding liquid, sauce or oil inside a sealed bag before it goes anywhere near a box. If the glass does break, the mess stays in the bag and the rest of the order survives.
3. Wrap each item individually. Australia Post's guidance is to wrap each item on its own, in tissue or similar, rather than relying on loose fill around a group of jars. Glass touching glass is how jars crack each other.
4. Use a snug, rigid inner box, then an outer box. Australia Post recommends a snug-fitting rigid box placed inside a sturdy mailing box, with cushioning between the two. The inner box stops movement; the gap between the boxes absorbs the knocks.
5. Fill every gap. Shredded paper, paper wrap, felt pads, moulded pulp inserts. The test is simple: close the box and shake it. If anything moves, it is not packed yet.
6. Remove glass where you can. For framed prints and mirrors, Australia Post suggests removing the glass from frames and protecting front and back with rigid board larger than the frame.
Inserts beat loose fill at volume
Hand-wrapping works for ten orders a week. At a few hundred a month it becomes the slowest step in packing and the least consistent one, because every packer wraps a little differently.
Moulded pulp or cardboard inserts cut to your jar sizes solve both problems. Each jar drops into its own slot, the inner box is the same every time, and a new packer gets it right on the first day. The insert costs more per unit than tissue paper; it usually costs less than the breakages and the packing time it replaces.
The trade-off nobody mentions: protection costs postage
More padding means a bigger box, and Australia Post charges on whichever is higher: the actual weight or the cubic weight worked out from the box's size.
A 30 × 30 × 20 cm box has a cubic weight of 4.5 kg, whatever is inside it. Two jars and a lot of air in that box are charged as 4.5 kg. The same two jars in a fitted insert inside a 20 × 15 × 15 cm box come to just over 1.1 kg.
That is the real packaging decision for glass: not "more protection or less", but "the right protection in the smallest box that holds it". Run your own carton sizes through our cubic weight calculator before you order a pallet of boxes.
If the glass holds food
Australia Post allows certain food to be sent by post as long as it is carefully packed. Its guidance asks senders to make sure the food will still be usable when it arrives, that no smell escapes the packaging, and that the packaging is rodent-proof. Perishables are restricted, and fruit and vegetables face interstate limits that vary by state.
For shelf-stable products in sealed jars, the packing method above covers most of what matters. Check Australia Post's current food and fragile packaging guidance for your specific product before you ship it, and check separately what food regulations apply to your business; that part is about your product, not your packaging.
Gift hampers and mixed boxes
Hampers are the hardest case: glass, a bottle, something soft and something that crumbles, all in one decorative box that was designed to look good rather than survive a sorting machine.
The approach that works is to treat the decorative box as the inner box. It gets its own insert or tight fill so nothing moves, then goes inside a plain, sturdy shipping carton with cushioning around it. The customer opens the shipper and finds the gift box intact, which is the whole point of buying a hamper.
Test before you scale
Before a launch or a peak season, send a handful of test parcels interstate, to a friend in Perth or a relative in Hobart, packed exactly as you plan to pack orders. Long routes and more handling find the weak point in a packing method faster than anything else. It is the cheapest quality control you will ever do.
Then track breakages per hundred orders, not as a feeling. If the number moves, something changed: the box supplier, the fill, or the person packing.
How this works at Parcelo
Shelf-stable packaged food and fragile products, glass included, are handled with a packing specification agreed per product at onboarding: the inner protection, the carton size and the fill, written down so every order is packed the same way. Every item is scanned against the order before the parcel is sealed.
If you are working out whether outsourcing makes sense for a glass-heavy range, custom packaging covers how packing is specified, and our pricing page sets out what fulfilment costs line by line.
Shipping glass at volume? Send us your products and order numbers and you will get a quote with the packing specification built into it, not added later.